Gema OptiFlex Pro S Powder Coating Unit

Gema OptiFlex Pro S Powder Coating Unit

Manufacturer:
Gema
Product ID:
1017975
Brochure:
8,138.40 (6,782.00 ex VAT) 

spacer

For powders that are difficult to fluidize

Do you need to economically process powders with a tendency to separation during fluidization? OptiFlex Pro S is your best choice!

  • Unique stirrer system with 18 litre hopper capacity
  • Processing of powders with poor fluidization capability
  • Preventing the separation of powders
  • Processing of small quantities without any loss
  • Complete emptying of remaining powder

OptiFlex Pro - Boost your manual coating to a new level!

Power: Maximum coating performance

The newly developed PowerBoost technology of the OptiFlex Pro series offers with the 110 kV the highest powder charging capacity in the powder coating industry while complying with safety regulations. The operator benefits from an outstanding coating performance.

Quality: Best application results

With OptiFlex Pro you coat extremely efficiently and with consistently high quality. The PCC (Precise Charge Control) mode regulates the spray current even in the lowest ampere ranges (0-10 A) with the highest accuracy. This prevents overcharging of even the most demanding powders such as metallic powder and ensures the highest quality in thick film and multi-layer applications and recess areas.

Control: Master the application!

The new features of OptiFlex Pro also give you a technological edge. The Electrostatic App (E-App) with the integrated line management functions and service features make the coating process transparent and better controllable.

Specifications:

Nominal input voltage:100 240 VAC
Frequency:50 60 Hz
Temperature range:5 C to +40 C +41 F to +104 F
Max. input pressure:10 bar / 145 psi
Min. input pressure (dynamic):5,5 bar / 80 psi
Max. water vapor content of compressed air:1,3 g/m
Max. oil vapor content of compressed air:0,1 mg/m
Compressed air consumption normal operation:5,5 Nm/h
Hopper volume:18 l