Call or WhatsApp us on 0345 873 0263 

Binks Standard Spray Booth Filter Paper

Binks Standard Spray Booth Filter Paper

Manufacturer:
Binks
Product ID:
Z96741/4A
Brochure:
£38.40 (£32.00 ex VAT) 

spacer
Our most popular "Standard" filter is constructed from two sheets of heavy "Kraft" type card paper, pleated and glued, fitted with an extension limiter to ensure optimum performance.

Suitability:

Designed to capture any wet solids or liquid particles: high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.

High Capacity:

The design of the filter incorporates 2.5" deep pockets, this means that the filter is capable of collecting up to 6 times the capacity of common mesh type filters.

Key features and benefits

  • Up to 98.1% filtration efficiency **
  • High paint holding capacity - up to 18Kg//M² **
  • Extension Limiter – ensures optimum efficiency.
** dependant on paint used

Specifications:

Filter Construction:Self supporting, 2 ply high strength kraft cardboard paper, punched, pleated and stapled. Bright white finish.
Max. Recommended Air Flow Rates:0.5 m/s to 1.0 m/s (100 ft/min to 200 ft/min) Normal 0.7 m/s (140 fpm)
Pressure Differential:at 0.25m/s = 8Pa
at 0.50m/s = 20Pa
at 0.75m/s = 30Pa (0.12”SWG)
Max.130-250Pa (0.52”-1.00”SWG)
Optimum Pleat Expansion:8 pleats per linear foot (30.4cm)
Efficiency:Up to 98%.
Capacity:Up to 18kg/sq. metre
Dimensions:90cm wide x 924cm long (36"w x 30ft long)

Specifications:

Filter Construction:Self supporting, two ply high strength cardboard paper. Bright white finish.
Air Flow Rates:100-200 feet per minute (0.5 - 1.0 metres per second) ormal 140 fpm (0.7 ms)
Pressure Differential:Initial @ 0.75 M/S = 30 PA (0.12" SWG), MAXIMUM 130-250 PA (0.52"-1.0" SWG)
Temperature Range:MAXIMUM 180°C (356°F)
Expansion Limiter:Expansion limiting straps ensure correct pleat guaranteeing optimum density of 8 corrugations per running foot (30.4cm)



ra