These economy filters still provide a similar high level of efficiency as our alternative standard version but due to their slightly different construction, cost considerably less!
Designed to capture any wet solids or liquid particles: high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.
The design of the filter incorporates 2.5" deep pockets, this means that the filter is capable of collecting up to 6 times the capacity of common mesh type filters.
Key features and benefits
- Up to 98.1% filtration efficiency **
- High paint holding capacity – up to 18Kg/M² **
- Self supporting – Easy to install.
- Extension Limiter - ensures optimum efficiency.
** dependant on paint used
|Filter Construction:||Self supporting, 2 ply high strength kraft cardboard paper, punched, pleated and stapled. Bright white finish.|
|Max. Recommended Air Flow Rates:||0.5 m/s to 1.0 m/s (100 ft/min to 200 ft/min) Normal 0.7 m/s (140 fpm)|
|Pressure Differential:||at 0.25m/s = 8Pa|
at 0.50m/s = 20Pa
at 0.75m/s = 30Pa (0.12”SWG)
|Optimum Pleat Expansion:||8 pleats per linear foot (30.4cm)|
|Efficiency:||Up to 98%.|
|Capacity:||Up to 18kg/sq. metre|
|Dimensions:||90cm wide x 924cm long (36"w x 30ft long)|